NOTICE:
Rock Loading Machine the broken rock is one of the most arduous tasks in the open mining of the mine. When excavating the roadway, the time spent in loading the rock accounts for about 30-40% of the time of each work cycle (rock drilling, blasting, and shipping out of the rock), so the overhaul of the rock loading loader is also the most important work, then How about repairing the rock loading machine? The following I will introduce you to everyone:
1. Check the contact and wear condition of the gears in the gearbox, check the clearance of the bearing and the wear condition of the raceway, and check the damage of each seal.
2. Check the wear of the gears, planet carriers, bearings and keyways of the planetary gear train. Change the butter and skeleton oil seal.
3. Check the wear condition of the gland and the cover, and repair or replace the parts with excessive wear.
4. Check whether the brake brake belt and its connection adjustment components can wear out over the limit, whether it can be sensitive or not, and if necessary, change it.
5. Check whether the trolley of the Rock Mucking Loader is deformed or cracked, and wake up and repair the repaired parts.
6. Check whether the drive shafts can be rusted and deformed, and stop the oiling to make it turn sensitive. The contact and anti-offset are complete and replaced if damaged.
7. Check whether the wheel and the guide pulley can be completed and in good condition, and the rotation can be sensitive.
