NOTICE:
I believe that we have heard a lot of short-circuit problems. Not only will this happen in terms of electricity, but also the electric rock mucking loaders we use will not be an exception. How do these situations happen?
1. The short circuit that generally occurs on the electric rock loader is because the current does not pass through the electrical equipment, and directly passes through the positive pole of the power supply to the negative pole of the power supply.
2. The wire insulation damage of the electric rock loader, the conductive parts of the electric appliance, the exposed part of the wire or the falling wire head and the touch of the car body also cause the problem; the liquid version shows that the fuse is not lacking, but after the circuit switch is turned on, The electrical equipment does not work, generally because the wire is dropped, the contact at the joint is poor, the switch is broken, the wire is broken, the plug is loose or oily, and the circuit is blocked.
3. There is also a case where the electric equipment in the circuit, the positive and negative poles of the power supply are not in a loop, and on the electric rock loader, the short circuit has the following disadvantages: the fuse is blown after the switch is turned on, or the wire is heated and has a burnt smell. Even smoke and burn.
We must pay more attention to the circuit problems. These situations will not only affect our use of electric rock loaders, but also pose a threat to our safety if we do not pay attention to them. We should not only pay attention to the safety of equipment operation, but also pay attention to the power consumption.
