NOTICE:
Long-term use of electric tunnel mucking loader machine without corresponding lubrication and maintenance work will cause many of its parts to rust, which will cause the rock loader to lose its flexible driving state and seriously affect work efficiency. Therefore, if you want to keep the rock machine in good condition for a long time, it is necessary to take good rust prevention measures, so let ’s teach everyone how to carry out rock mucking loader rust prevention measures.
1. Chemical rust removal: The chemical reaction between acid and metal oxide is used to remove the rust products on the metal surface of the electric rock loader, which is commonly known as pickling and rust removal. This method is suitable for operation in the workshop.
2. Apply anti-oxidation paint: paint, mineral oil or plastic spray, fire enamel, etc. on the surface of the equipment. The surface of steel is plated with a layer of metal that is not easy to rust, such as zinc, chromium, etc. These metal surfaces can form a dense oxide film to prevent iron products from contacting water and air and rust.
3. High-pressure water abrasive derusting: Use the impact of high-pressure water jet and water pry to destroy the scraper rust and the adhesion of the coating to the steel plate. This method has no dust pollution, does not damage the steel plate, greatly improves the rust removal efficiency, and has good rust removal quality. However, the steel plate after derusting is easy to return to rust, and it is necessary to apply a special wet derusting coating, which has a great impact on the coating of general performance coatings.
Whether it is an electric rock mucking loader or any other mechanical equipment, corresponding anti-rust measures need to be done, otherwise the equipment will be corroded and rusted due to various external factors, thereby shortening its service life and frequent failures. Therefore, everyone must do a good job in this regard, and should not be sloppy and perfunctory.
