NOTICE:
The rock mucking loading machine has the characteristics of high loading efficiency, simple structure, good reliability and wide application range. It can not only be used in drift, but also in inclined roadway below 30 degrees. It is a main equipment to improve driving speed and realize tunneling mechanization.
The scraper type rock mucking loader is used in rock roadway excavation with 1.1m3 tramcar or skip. It is suitable for roadways with clear height [p-15b (b), p-30b greater than 2m, p-60b greater than 2.4m] and net cross-section [p-15b (b) 4.5m2, p-30b 6m3, p-60b 9m2 and above]
The mucking loading machine draws the main rope and rope tail respectively through the two rollers of the winch to make the scraper move back and forth to pick up the rock into the material trough, and then unload the rock into the tramcar or skip from the discharge port of the chute to realize the rock loading operation.
The mucking loading machine is mainly composed of fixed wedge, tail wheel, scraper bucket, trolley, winch, control mechanism, guide wheel, material trough (feed trough, intermediate groove, discharge groove) and electrical part. Pb series scraper loader has the characteristics of high efficiency, compact structure and wide application range.
It is used for rock loading with tramcar in roadway excavation. Rock mucking loading machine can not only load rock up and down the mountain roadway below 30 ° but also carry out the parallel operation of driving process to improve the driving speed. It is one of the main mechanical equipment to realize the mechanization of roadway excavation.
