NOTICE:
What Are The Precautions For The Tunnel Mucking Machine Working In The Tunnel?
It is very dangerous for the rock mucking loading machine to load rock in the tunnel. In order to ensure that the operator will not be in danger during the loading process, we are required to pay attention to some matters when tunnel mucking machine loading.
In the ,mucking loading machine working time we first need to check the tunnel and working face there is no top help, there is the need to check the tunnel there is no blind gun involved in harm is the need to check the blasting pile there are no some residual explosives or detonators, etc.
When the tunnel mucking machine is operating, it should ensure that there is a good lighting system in the transportation and the location of the operation, and signal devices should be set up at the same time in the process of transportation and lifting.
At the time of transport need to check the orbit above have some obstacles, and need to check whether in a flat state, and must be avoided when operate other staff near the tunnel mucking machine work scope, and in the side of the operator should set up special protection device, This is also to avoid the steel rope because of fatigue fracture and injury.
Battery tunnel mucking machine should also have the corresponding protection device if there is an abnormal situation can not run, and when walking in the hole, we must pay attention not to overspeed operation.
There is in the process of transportation if there is a drop must send a signal, waiting for the unified command has processing personnel to deal with.
The above is the attention of the tunnel mucking machine in the tunnel, because the operation of the rock loading itself is not convenient as flat ground, so we need to operate in strict accordance with the operation mode when we operate.
