NOTICE:
What is the difference between the conveyor scraper of the Rock Mucking Loading Machine/Tunnel Mucking Machine？
We know that there are two ways of conveying the mucking machine, namely belt conveying and scraper conveying, and the scraper of scraper conveying is also different, do you know?
The Tunnel Mucking Machine is designed and produced to adapt to the slope of the tunnel. The difference between it and belt conveying is that the slope suitable for belt conveying is a small slope, and the slope can be conveyed by belt within 8 degrees and cannot be downgraded, while scraping The slope of the board is about 20 degrees in the roadway. In such an environment, the efficiency of scraper conveying is higher than that of belt conveying. Of course, different working environments are used differently.
There are also two types of Rock Mucking Loading Machine, one is Mucking Loading Machine, the other is wheel tunnel mucking machine, and wheel scraper scraper can only be used on down slopes with a slope of less than 8 degrees. The crawler scraper is different, he can use the roadway uphill or downhill. And each slag scraper has a different size of the feeding port and the conveying frame, and the conveyed materials are also different. The scraper of the scraper scraper will determine the length of the scraper according to this situation. The width and height of the scraper. These all affect the ability of scraper conveying.
These are the characteristics of the scraper tunnel mucking machine. It is necessary to maintain the scraper chain and scraper during use. After the work of the day, it is necessary to clean the slag or soil slag on the scraper to keep the scraper and chain clean. To prevent corrosion. In this way, the service life of the tunnel mucking machine can be increased.
