NOTICE:
The electric rock mucking loading machine is a single-bucket, front-loading and back-unloading rock-loading machine that walks on the track. Its purpose is to load the rock or ore from the blasting into the mine cart behind. So what is the mucking loading machine training work like?
1. When carrying out the repair work of the electric tunnel mucking machine, it is necessary to strictly implement the standards for the quality of the repair and repair that are legally stipulated when the machine leaves the factory. Inspection, disassembly and repairing shall be carried out according to the standard of repairing operation.
2. When opening the reducer and drum that need to be repaired, strict dust-proof and cover measures should be taken to prevent coal, gangue, debris, and water from falling into it. When disassembling and assembling parts, care should be taken to keep the small parts, and it is forbidden to throw them away or drop them into the rock mucking loading machine.
3. During the mucking loading machine repair work, we must pay attention to protect the explosion-proof surface of the facility from loss. For gears, bearings, etc. that need to be repaired or replaced, components of the same specification and model must be selected.
4.The training of the electrical system must comply with the regulations and other relevant regulations on the training of electrical facilities.
5. When the electric tunnel mucking machine adopts a vacuum contactor, it should check whether the resistance-capacitance protection fails and the three-phase synchronization every month, so as not to burn the motor. Vaseline oil should be applied to the explosion-proof surfaces and all explosion-proof button boxes before the tunnel mucking machine goes down and repairs.
