What Are The Points To Be Paid Attention To When Repairing The Rock Loader?

1. Clean up the dirt and oil on the surface of the parts and components of rock mucking loading machine, and wash the crawler part in time.

2. Check whether the fasteners of the fuselage of rock mucking loader are loose or not.

3. Check whether the hydraulic oil is sufficient or not, whether there is leakage, find out the cause in time and supplement. Note: When checking the leakage of hydraulic pipeline, it is necessary to wait until the working device is lowered to the ground, the motor is closed and the pressure in the system is released before the maintenance of hydraulic pipeline can be carried out.

4. Check whether there are any abnormalities or damages in the electronic control box and electrical circuit.

5. Check whether the rotary device is flexible

6. Check whether the hydraulic cylinders are flexible, whether there are scratches in the cylinders, whether there are leakage phenomena in the tubing and joints. If so, the reasons should be found out in time and troubleshooting should be done.

7. Check whether the pin parts of rock mucking loader are flexible, and add lubricating oil to the oil cups and pin parts.

8. After a day's work of the rock mucking loading machine, the whole track shall be inspected, cleaned and maintained as necessary.