Start And Run The Mucking Loading Machine, If You Don’t Know, Come And See

Start operation of rock mucking loading machine

After regular inspection to make sure that the rock mucking loading machine is in good condition, open the lock, send the start signal, evacuate the personnel to a safe place, drive the empty car for a test run, and run it under no-load condition; check whether the control buttons, operating mechanisms are flexible and reliable, and whether the lighting is good, The wire rope is properly tightened, the walking is normal, and the wear condition meets the requirements; the running sound of each part is normal without strong vibration. The brake device of the bucket rake must be complete and reliable.

After the mucking loading machine test run is normal, the driver stands on the side of the operating handle, pressing the main and auxiliary rope handles with both hands to move the rock loader forward, and adjust the distance of the rock loader according to the requirements of the operating regulations.

Tighten the rail clamp, tighten the bolts, and fix the rock (coal) loading machine firmly.

Operating operation of mucking loading machine

Push the empty mine cart into the rock (coal) mucking loading machine and then under the unloading trough.

The driver stands on the side of the handle of the mucking machine and presses the handle of the main rope so that the main rope pulls the rake number one to rake the rock (coal). When the rock (coal) is unloaded into the mine cart, loosen the main rope to operate The handle is pressed against the secondary rope to operate the handle, so that the empty rake returns to the rock pile on the working face.

After loading the middle gangue (coal), re-hang the tail wheel to load the rock piles on both sides.

After the gangue (coal) is loaded, take off the tail wheel and re-hang it on the rock loader.

During the rake loading process of the mucking machine, the driver should always pay attention to the operation of each part of the machine. When there is a failure during use, the temperature of electrical or mechanical parts exceeds the limit, the running sound is abnormal or there is strong vibration, the driver must stop immediately and cut off the power supply.