NOTICE:
When the rock mucking loader opportunity has large rocks or the rake bucket is blocked, the tunnel mucking machine bucket should not be forcibly pulled, and the rake should be pulled out 1~2m to prevent the rope from breaking or burning the motor.
The rock mucking loading machine rake bucket moves back and forth to rake the rock (coal). After the mine cart is full, the heavy cart is transported out manually or by a winch, and then pushed into the empty cart again for rake loading.
When the angle between the rope exiting direction of the rake bucket and the center direction of the rake bucket is too large, the driver should operate on the opposite side of the rope exiting to prevent the rake bucket from jumping out of the chute to injure the tunnel mucking machine driver.
When tunnel mucking machine raking in turning lanes, reliable two-way auxiliary guide wheels must be used to clean up the machine path, and there must be special personnel to command and signal contact.
When tunnel mucking machine raking in inclined shafts, no people are allowed under the rock loader. When the inclination angle is greater than 20 degrees, a guard pillar must be placed in front of the driver. A baffle can be installed at the bottom of the rake loader (the length of the two sides of the deep roadway is not less than 500mm) is a safety device to prevent sports cars and measures to prevent the fuselage from sliding down. The rake bucket rock mucking loading machine must be moved upward with a winch.
