NOTICE:
The electric mucking loading machine is mainly used to load rocks during normal use, but in fact, there are many operating precautions that we need to pay attention to when loading, so that it can ensure that it is at the time of use. In a relatively stable state.
1. First, the driver needs to check whether the wiring of each part of some electric rock mucking loading machine is normal when operating, and also needs to check whether the length of the track and other laying is sufficient for use, and make sure that there is no problem after inspection. You can start using it.
2. The electric tunnel mucking machine must be in a shutdown state when adding lubricating oil or repairing the equipment, and avoid performing the above operations during operation.
3. Don't blindly disassemble some circuits of the electric mucking loading machine when there are problems. When disassembling the electric rock mucking loading machine, you must find a special electrician to deal with it.
4. The driver of the electric tunnel mucking machine must cut off the power when leaving the machine, and then also need to notify the surrounding staff when using it.
5. Sometimes when moving the electric tunnel mucking machine, you must pay attention to the position of the cable. When you close the microphone, you pull the end or crush it when moving.
6. If something abnormal is found when the electric rock mucking loading machine is in use, it needs to be stopped immediately and the equipment is checked out for maintenance. It cannot be used until the maintenance is completed.
The above are some operating matters that need to be paid attention to when using the electric rock mucking loading machine in normal use, because although it only needs to be loaded and transported when it is used, it needs to be used in conjunction with other equipment.
