NOTICE:
The electric rock mucking loading machine also has certain requirements for the condition of the equipment when it is in use. After checking everything, it can be started only when there is no major wear and tear, so as to ensure that it will not be caused by failure during operation. Lead to more serious problems overall.
After the mucking loading machine is started, you need to move forward and backward to see if it is more flexible. The wear depth of the wheel tread should be less than 10mm, and it is necessary to ensure that the bucket does not touch the track. The buttons on the control box are more flexible when pressed and are operated correctly when mucking loading machine used. The front and rear lights also need to be checked to see if they can light up, and the bucket needs to be checked for serious open welds or cracks, which will greatly affect the use.
When lifting the tunnel mucking machine bucket, it is necessary to ensure that the left and right arms will not touch the vertical plates on both sides of the turntable, and it can automatically reset to a more correct position after the end of use. The buffer spring used by the bucket also needs to be checked to ensure that it does not have some serious damage, and the steel wire rope used also needs to be checked for breaks. The role played by the lifting chain during use is also very important, so it is also necessary to check whether the lifting chain has any slight breaks.
The above describes the requirements for the electric rock mucking loading machine when it is in use. Generally, the equipment needs to be inspected according to this standard when the mucking loading machine is regularly inspected, so as to ensure that the mucking loading machine is used for a relative purpose. Used in a stable state.
