NOTICE:
Most of the operation of the rock mucking loader is carried out on a flat ground, but in fact, sometimes there are some special environments. It may not be very convenient to use. It is more loaded in inclined lanes. It may be more troublesome when the rock is, so how should we operate when we encounter this kind of situation.
1. Because the operation in the inclined alley usually has a relatively large angle of inclination, we have added an extra on the driver to prevent the gangue before the operation, so as to avoid the rock from rolling and falling when loading and transporting. To cause the driver to be injured, and to avoid staff walking around during the work.
2. The supporting feet are needed when tunnel mucking machine operating in the inclined lane, and it must be ensured that the lower end of the tunnel mucking machine and the bottom plate have a relatively stable contact.
3. When mucking machine starting work, it is also necessary to pay attention to the wire rope at any time. If an abnormal situation is found, it must be dealt with in time to avoid greater impact.
4. There is no need to fill the container too full when loading it on the slope. It is about 80% of the volume. Also, some big rocks must not be loaded in the protruding position.
The above introduces some methods of operating the rock mucking loader in the inclined lane, but because it is more troublesome to operate in the inclined lane, it is actually possible to operate on the flat ground as much as possible instead of in the inclined lane.
