NOTICE:
During the operation of the rock mucking loader, there may be smoke, and at the same time, the equipment will also be unable to operate. So when the equipment is in this situation, it needs to be repaired. Let’s look at it below. What is the reason for the smoke from the Mucking Machine?
1. When the temperature of the rock mucking loader operating environment is too high or even exceeds 40°C, it will cause the equipment to enter the air and overheat. It is more difficult to dissipate heat, so some cooling measures need to be taken when this kind of situation occurs.
2. Or the cage rotor has broken bars or the winding rotor coil joints have loosened, which will cause the rock mucking loading machine maintenance network to have too much current and generate heat, then when you encounter this kind of situation You only need to weld or replace the copper bar rotor. If it is a cast aluminum rotor, you need to replace the mucking machine rotor.
3. It may be because there is a problem with the winding connection. If it is wrong, the star is connected to a triangle or the other way is wrong. Then the rock mucking loading machine will overheat or even heat up when running under the rated load. In the case of smoke.
4. It may also be because the fan in the mucking machine is damaged, or it is installed reversely or even not installed directly during installation. Then it is necessary to install according to the correct method. The damaged fan also needs to be repaired or replaced of.
5. It may also be caused by the bearing damage or excessive wear, which will also cause the stator and the rotor to rub against each other, so at this time, it is necessary to check whether the bearing is loose.
The above is the reason for the smoke from the rock mucking loading machine. In fact, when the equipment is used in normal times, it is necessary to pay attention to avoid overuse. After the use is over, it is also necessary to do a good job of maintenance.
