NOTICE:
When the mucking loading machine is in use, the line may need to be reconnected after aging. First of all, when connecting to the power, you need to make sure that it is in a relatively power-off state, but other than that What are the other requirements when connecting to electricity?
When the rock mucking loading machine is connected to electricity, it should be ensured that the detection is within 10 meters of the surrounding environment. Generally, it is necessary to check whether the concentration of some gases such as gas is within the allowable range, and to ensure that the discharge test is carried out in this case There will be no dangerous situation, especially when the environment in which it is used contains a lot of flammable gas, it must be carefully confirmed.
When the tunnel mucking machine is connected to the power supply, it is generally required that the cable on the load side should be connected first, and then the cable on the power side should be connected. However, when disconnecting the cable, the side cable should be removed before it can be removed. Load-side cables, to avoid some dangerous situations caused by simultaneous disconnection and connection of cables on both sides.
When disassembling and connecting the tunnel mucking machine, the power failure should be handled in accordance with relevant regulations first, and the power failure sign should be hung up and asked to be taken care of by someone to avoid accidentally turning on the power.
The above introduces the specific requirements of the rock mucking loading machine when connecting to electricity. When connecting to electricity, you must check the surrounding environment to ensure that there will be no problems when operating in the correct way. , Also, when you reconnect the power, you must check in detail whether it is in a power-off state.
